Connect Bluetooth Thermometer
Connect the ThermoWorks Bluetooth thermometers to all DateCodeGenie® devices.
Parts Included:
- Bluetooth thermometer with rubber seal case
- Carrying case bag
Connect ThermoWorks Bluetooth Thermometer to Device
Steps:
1. To turn on ThermoWorks Bluetooth thermometers:
NOTES
- If the thermometer is not connected to a device or the power button (yellow button two arrows icon) is not pressed within the set Auto-off interval (default 10 minutes) then it will switch off.
- The thermometer can be turned off by pressing and holding the yellow button for 2 seconds until the screen goes blank.
TempTest™ Blue Model |
RayTemp Blue Model |
Thermapen® Blue Model |
---|---|---|
Press the power button (yellow button two arrows icon) to turn on thermometer, and the display will show the probe’s temperature. |
Press the power button (ON/OFF yellow button) to turn on thermometer, and the display will show the probe’s temperature. |
Pull out probe to turn on thermometer, the power button (yellow button two arrows icon) will briefly flash yellow color once. |
2. Scroll to Settings app (gear icon) from tablet home screen to open.
3. Tap Connected Devices to open.
4. Tap Pair new device.
5. Locate 19415240 Thermapen Blue, 20445929 RayTemp Blue, and 21196733 TempTest Blue, and tap to pair.
- TempTest Blue LED will briefly flash green.
- RayTemp Blue will have the Bluetooth symbol along with the temperature measurements display.
- Thermapen Blue will flash LED will briefly flash yellow.
6. Tap Home Button to return to tablet home screen and tap the DateCodegenie app.
7. Log in to the DateCodeGenie app with your username and password, if required.
8. Tap the navigation button to open options. Scroll to re Probe Module section and tap to open.
9. Confirm the thermometer connection status is displaying a message on top of the temperature: Connected - Press 'Transmit' button (yellow button two arrows icon) on Thermometer.
There are three ways to confirm the thermometer is connected on the app:
Temperature Probe Module
Tap the three dots and tap Connect.
Device Info Pop-up
Tap the three dots and tap Device Info. Then tap OK to exit pop-up window.
Thermometer Display or Light Indicators
Confirm the thermometer is connected or disconnected on the thermometer.
- The Thermapen Blue and TempTest Blue thermometers will have five rapid amber light flashes indicating when connecting or disconnecting.
- The RayTemp thermometer will show the Bluetooth symbol on the display when connected.